Commercial solar inspections
Commercial Solar
Thermal Imaging
Drone and ground-based infrared inspections for commercial solar systems across metropolitan and regional NSW.
THERMAL SCAN
Potential hotspot identified
PRIORITY 2
See what ordinary inspections miss
Find solar faults before they become expensive failures.
Thermal imaging reveals abnormal heat patterns that may indicate damaged cells, failed bypass diodes, connection issues, shading or underperforming modules. Our inspections give asset owners and facility managers clear evidence to plan maintenance and protect system performance.
We inspect operational commercial systems with minimal disruption and deliver a practical, image-based report—not just a folder of thermal photographs.
What we identify
Actionable findings, clearly
prioritised.
01
Hotspots & cell damage
Locate overheated cells, modules and areas showing abnormal temperature patterns.
02
Diode & string faults
Identify patterns consistent with bypass diode, substring and open-circuit issues
03
Connection problems
Highlight suspect junction boxes, connectors, isolators and electrical terminations.
04
Performance concerns
Find thermal anomalies linked with soiling, shading, mismatch or module degradation.
05
Safety risks
Prioritise elevated temperatures that warrant prompt electrical investigation.
06
Portfolio trends
Build consistent inspection records across multiple sites and large solar assets.
What we identify
From planning to a decision-
ready report.
Each inspection is planned around the site, system size, access, operating conditions and reporting requirements.
1
Scope
We confirm site details, panel count, access, system documentation and inspection objectives.
2
Inspect
Radiometric thermal and visual images are captured using the most suitable drone or ground-based method.
3
Analyse
Findings are reviewed by a qualified thermographer and classified by condition and priority.
4
Report
You receive a clear report with annotated images, locations, observations and recommended next actions.
THERMAL ANOMALY
ΔT 18.6°C
PROFESSIONAL REPORTING
Evidence your
maintenance team can use.
Reports are structured to help you understand what was found, where it is located and what should happen next.
- Visual and thermal images shown side by side
- Clearly identified panel or equipment location
- Temperature measurements and observed patterns
- Priority-based defect classification
- Practical recommendations for further investigation
- PDF format suitable for asset and maintenance records
NSW metro & regional
Commercial solar inspection coverage across
New South Wales.
We support warehouses, factories, shopping centres, schools, healthcare facilities, strata properties, farms and other commercial sites throughout Sydney and regional NSW. Multi-site programs can be coordinated under one consistent reporting format.
Sydney Metro
Central Coast
Newcastle & Hunter
Wollongong & Illawarra
Regional NSW
Frequently asked questions
Commercial solar
thermography
FAQs.
It can identify abnormal heat patterns across large arrays efficiently, helping focus maintenance resources on modules or components that need closer investigation.
The method depends on the site, roof access, array layout, panel count and inspection objective. We can use drone-based and ground-based thermal imaging as appropriate.
Yes. Meaningful thermal inspection requires suitable operating and environmental conditions. We confirm the requirements when scheduling the inspection.
Yes. We can coordinate multi-site inspections and provide consistent reports for property portfolios and commercial operators across NSW.
No. Thermography is a valuable non-invasive diagnostic method, but some findings may require follow-up electrical testing or physical inspection by an appropriately licensed person.
Protect performance. Plan maintenance.
Request a commercial solar
thermal imaging quote.
Tell us your site location, approximate panel count and whether you have system drawings or previous reports.
